Cenobots S5 · Autonomous sweeper
Autonomous sweeping for large hard floors
The S5 sweeps dust and debris from warehouses, factories and other large hard-floor areas, running on a schedule without a driver.
Built for large areas
Suited to wide, open floors where manual sweeping takes hours.
Runs to a schedule
Set it to sweep between shifts or overnight, and it repeats the route.
Frees up operatives
Staff who sweep by hand or ride-on can move to other site tasks.
Meet the S5
A sweeper that maps and drives itself
The S5 is mapped to your site once, then sweeps assigned zones automatically. It picks up everything from fine dust to wood chips, packaging film, bottles and screws.
It fits through a standard 32-inch door and rides over speed bumps. When the battery runs low, it goes back to its dock and charges itself.
Ideal applications
Where the S5 fits
Warehouses
Aisles and open floor between racking.
Factories
Production and circulation areas with hard floors.
Logistics hubs
Loading and marshalling areas with regular debris.
Car parks and transport hubs
Wide floors swept on a routine, speed bumps included.
Key features
What the S5 does
Autonomous navigation
Follows a mapped route and adapts when the layout changes.
Scheduled sweeping
Runs start automatically at set times.
Vehicle and obstacle detection
Spots people, vehicles and forklifts, and plans a safe path round them.
Spot cleaning
Finds debris and cleans just those spots, up to 4× faster than a full sweep.
Dust control
Strong suction and a HEPA filter. An automatic shaker stops the filter clogging.
Charges itself
Runs 5–7 hours, then docks and charges in 2 hours.
Works with our scrubbers
Sweeps first, then a Cenobots scrubber dryer follows to wet clean.
Technical specifications
S5 specification
| Specification | S5 |
|---|---|
| Dimensions (L × W × H) | 1030 × 720 × 990 mm (width excl. side brush) |
| Weight | 130 kg |
| Cleaning type | Autonomous sweeper (dry), with HEPA dust filtration |
| Floor compatibility | Hard floors |
| Cleaning width | 820 mm |
| Productivity (theoretical) | About 2,500 m²/hr |
| Hopper capacity | 50 L |
| Max. speed | 1.4 m/s |
| Edge cleaning | 0 cm from the wall |
| Min. passable width | 810 mm (standard 32-inch door) |
| Max. climb angle | 8° |
| Battery | LFP, 75 Ah |
| Battery runtime | 5–7 hrs |
| Charging time | 2 hrs |
| Workstation / docking | CS5 charging station: returns and recharges automatically |
| Sensors | 32-beam 3D LiDAR (150 m range) |
| Processor | Nvidia AI chip, 100 TOPS |
Model S5 · source: Cenobots 2026 catalogue, S5 brochure and product sheet
Download the brochureROI calculator · illustrative
Compare the S5 with a conventional sweeper
Choose how the floor is cleaned now and how you would pay, then enter your own figures. The estimate counts machine cost and staff time only.
Finance. Finance arranged through All Equipment Finance Ltd, an Appointed Representative (FRN 995248) of First Business Finance (UK) Ltd (FRN 685879), authorised and regulated by the Financial Conduct Authority. Payments assume the business has traded for over 3 years. An admin fee applies, typically £169 + VAT. Tax relief is shown for illustration only; check with your accountant. All finance is subject to status and affordability checks. Terms and conditions apply.
Method.
Excluded. Consumables, servicing, electricity, water, setup and finance costs. Robot prices exclude the workstation and charging station. Robot staff time is the manufacturer figure and assumes automatic refilling; without a workstation, refilling and draining add staff time. Results are an estimate, not a quote or a guarantee. Site suitability is confirmed by survey before deployment.
S5 questions
What floors can the S5 sweep?+
Hard floors, including warehouse floors and car park decks. It rides over speed bumps and climbs slopes up to 8°.
Does the S5 scrub or wet clean?+
No. The S5 is a sweeper. For wet cleaning, see the L-series scrubbers.
Can I see the S5 before deciding?+
Yes. Book a demo and we will run it on your floor.
Interested in the S5?
See it on your own floor, or ask the team for more detail.
